Download XTX(R) Datasheet

Additive for short term adhesion in hot binders.

XTX (R) is a mix of fatty imidazoline / amidoamine derivatives and polyethylene amines designed for use as a "short-term only" adhesive agent for hot binders to ensure a better bitumen/aggregate bond.

Back More info
  • Characteristics
  • Density & Viscosity
  • Formulation Examples
  • Storage & Handling


XTX(R) must be protected from exposure to water and to long-term exposure to atmospheric moisture. When mixed with water, a chemical reaction can occur which may lead to a reduction in the performance of the additive. Water may also flash/splash when added to the hot bitumen.

Atmospheric moisture contamination takes place slowly on the additive surface exposed to moist air. When in use, protect from rain and seal tightly when not in use. Do not leave small amounts in containers for long periods before using it. Inspect the storage container and all seals for damage or leaks.

XTX(R) must be protected from frost. Continued cold weather storage can lead to major increase in the viscosity of the XTX(R). This can lead to difficulties in pumping the additive. XTX(R) will precipitate and form a layer at the bottom of the storage vessel at low temperatures. If this occurs the additive should be heated or agitated thoroughly to insure a homogeneous mixture before use. To prevent this layer from developing XTX(R) should be stored at temperatures above 10°C.


Drum of 200Kg / IBC of 1000Kg

Contact us: info@chemoran.com

For more information on any of our products, contact us directly. For more contact information click here.